see this link ....its says CE 100 is not supported..i was successful in configuring EC1260
On Wed, Jan 27, 2010 at 12:06 AM, renuka prasad <renukaprasadb@gmail.com> wrote:
On Wed, Jan 27, 2010 at 12:03 AM, madhukara phatak <madhukaraphatak@gmail.com> wrote:
what is its series...since on net it says that ubuntu only supports two types
CE 100
https://wiki.edubuntu.org/NetworkManager/Hardware/3G
says that needs some hacking
follwed this link -- but from third step i got confused and sine some links are broken i was a bit in dilemmaOn Tue, Jan 26, 2010 at 11:59 PM, renuka prasad <renukaprasadb@gmail.com> wrote:
On Tue, Jan 26, 2010 at 11:56 PM, madhukara phatak <madhukaraphatak@gmail.com> wrote:
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdialIn networking select Mobile BroadBand and select the India as countryThere u will get the Tata photon + option and just enter the number as username and passwordThen as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
no that wont work
device is not configuredOn Tue, Jan 26, 2010 at 7:49 PM, renuka prasad <renukaprasadb@gmail.com> wrote:
_______________________________________________Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sr1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output
rvcemcabrp@rvcemcabrp-laptop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 012: ID 201e:2009
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list
FSUG-Bangalore@mm.gnu.org.in
http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
_______________________________________________
FSUG-Bangalore mailing list
FSUG-Bangalore@mm.gnu.org.in
http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
_______________________________________________
FSUG-Bangalore mailing list
FSUG-Bangalore@mm.gnu.org.in
http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
_______________________________________________
FSUG-Bangalore mailing list
FSUG-Bangalore@mm.gnu.org.in
http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
_______________________________________________
FSUG-Bangalore mailing list
FSUG-Bangalore@mm.gnu.org.in
http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
_______________________________________________
FSUG-Bangalore mailing list
FSUG-Bangalore@mm.gnu.org.in
http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore