Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdial In networking select Mobile BroadBand and select the India as country There u will get the Tata photon + option and just enter the number as username and password Then as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
On Tue, Jan 26, 2010 at 7:49 PM, renuka prasad renukaprasadb@gmail.comwrote:
Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
On Tue, Jan 26, 2010 at 11:56 PM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdial In networking select Mobile BroadBand and select the India as country There u will get the Tata photon + option and just enter the number as username and password Then as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
no that wont work device is not configured
On Tue, Jan 26, 2010 at 7:49 PM, renuka prasad renukaprasadb@gmail.comwrote:
Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
what is its series...since on net it says that ubuntu only supports two types
On Tue, Jan 26, 2010 at 11:59 PM, renuka prasad renukaprasadb@gmail.comwrote:
On Tue, Jan 26, 2010 at 11:56 PM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdial In networking select Mobile BroadBand and select the India as country There u will get the Tata photon + option and just enter the number as username and password Then as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
no that wont work device is not configured
On Tue, Jan 26, 2010 at 7:49 PM, renuka prasad renukaprasadb@gmail.comwrote:
Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
On Wed, Jan 27, 2010 at 12:03 AM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
what is its series...since on net it says that ubuntu only supports two types
CE 100
https://wiki.edubuntu.org/NetworkManager/Hardware/3G says that needs some hacking
follwed this link -- but from third step i got confused and sine some links are broken i was a bit in dilemma
On Tue, Jan 26, 2010 at 11:59 PM, renuka prasad renukaprasadb@gmail.comwrote:
On Tue, Jan 26, 2010 at 11:56 PM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdial In networking select Mobile BroadBand and select the India as country There u will get the Tata photon + option and just enter the number as username and password Then as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
no that wont work device is not configured
On Tue, Jan 26, 2010 at 7:49 PM, renuka prasad renukaprasadb@gmail.comwrote:
Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
see this link ....its says CE 100 is not supported..i was successful in configuring EC1260 http://www.techlineinfo.com/how-to-configure-tata-indicom-photon-and-relianc...
On Wed, Jan 27, 2010 at 12:06 AM, renuka prasad renukaprasadb@gmail.comwrote:
On Wed, Jan 27, 2010 at 12:03 AM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
what is its series...since on net it says that ubuntu only supports two types
CE 100
https://wiki.edubuntu.org/NetworkManager/Hardware/3G says that needs some hacking
follwed this link -- but from third step i got confused and sine some links are broken i was a bit in dilemma
On Tue, Jan 26, 2010 at 11:59 PM, renuka prasad renukaprasadb@gmail.comwrote:
On Tue, Jan 26, 2010 at 11:56 PM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdial In networking select Mobile BroadBand and select the India as country There u will get the Tata photon + option and just enter the number as username and password Then as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
no that wont work device is not configured
On Tue, Jan 26, 2010 at 7:49 PM, renuka prasad <renukaprasadb@gmail.com
wrote:
Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
On Wed, Jan 27, 2010 at 12:12 AM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
see this link ....its says CE 100 is not supported..i was successful in configuring EC1260
http://www.techlineinfo.com/how-to-configure-tata-indicom-photon-and-relianc...
i have seen this but i have seen other links where there are fixes , but unable to do that on my system
e.g one of my friend suggested to follow http://www.pubbs.net/kernel/200912/60195/
and also this link tells that it is possible to configure http://tantos.web.id/blogs/how-to-internet-connection-using-haier-ce100-and-...
On Wed, Jan 27, 2010 at 12:06 AM, renuka prasad renukaprasadb@gmail.comwrote:
On Wed, Jan 27, 2010 at 12:03 AM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
what is its series...since on net it says that ubuntu only supports two types
CE 100
https://wiki.edubuntu.org/NetworkManager/Hardware/3G says that needs some hacking
follwed this link -- but from third step i got confused and sine some links are broken i was a bit in dilemma
On Tue, Jan 26, 2010 at 11:59 PM, renuka prasad <renukaprasadb@gmail.com
wrote:
On Tue, Jan 26, 2010 at 11:56 PM, madhukara phatak < madhukaraphatak@gmail.com> wrote:
If you are using ubuntu 9.04 or 9.10 u can do it without editing wvdial In networking select Mobile BroadBand and select the India as country There u will get the Tata photon + option and just enter the number as username and password Then as u select the wifi from network manager,u can select the mobile broadband...hope it works :)
no that wont work device is not configured
On Tue, Jan 26, 2010 at 7:49 PM, renuka prasad < renukaprasadb@gmail.com> wrote:
Hi all
i was trying to configure tata photon + USB modem on ubuntu
some times my device is getting detected , and some other times it is not .... i get message as
Error mounting: mount exited with exit code 32: mount: block device /dev/sr1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Error mounting: mount exited with exit code 32: mount: /dev/sr1 is not a valid block device
it has 8GB memory slot ( we need to add a card, i have not added )
when i did lsusb i got following output rvcemcabrp@rvcemcabrp-laptop:~$ lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 012: ID 201e:2009 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 018: ID 0a5c:2110 Broadcom Corp. Bluetooth Controller Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
when i did wvdialconf
rvcemcabrp@rvcemcabrp-laptop:~$ sudo wvdialconf Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to wvdial-list@lists.nit.ca. rvcemcabrp@rvcemcabrp-laptop:~$
if you have links of any success in configuring the device kindly forward
thanks in advance
renuka prasad
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
FSUG-Bangalore mailing list FSUG-Bangalore@mm.gnu.org.in http://mm.gnu.org.in/cgi-bin/mailman/listinfo/fsug-bangalore
-
madhukara phatak -
renuka prasad