Hello All,
This is a little embarasing to ask as something as
simple as triband is not getting setup in linux. On
the day we met at Bandra, later I tried it out at my
uncle's place and no success. Now I got it at my place
and I tried dhcp as well as static ip but nothing
works. In dhcp, the dns becomes 192.168.1.1 instead of
mtnl's dns, so I made it static but no result.
/etc/resolv.conf show the 2 dns entries.
Help help!!
Rony.
___________________________________________________________
How much free photo storage do you get? Store your holiday
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
Couple of things to be taken care of when using The Best DSL service in Mumbai.
1) Please change router password from default "admin".
By going into the router--->Status, I can get my router's IP address.
If I keep trying the IPs directly in ascending or descending serial order, sure
enough I will reach other routers and where the default password is admin.
Not that I can gain anything out of it, but can fiddle around with the settings
and make it difficult for the other person. OR simply enable remote telnet
management/web management and try and exploit those.
Changing the admin password is a good first step.
2) The login/password (phone number/CA number) will work from any modem/location
which has DSL enabled. This means that unlike the Caller ID based dial up system,
I can use my username/password from anyone's dsl enabled location. The converse
is, someone could do the same to me too.
while they can get your number from the username field if they access your
router, they cannot get your CA number. However, one call to the call center and
a couple of requests later, you can get that too. for any number. They do not
have a good verification system in place.
So you can start downloading on others time. Just like the usernames/passwords
circulated during VSNLs 15000/yr TCP/IP account days.
Changing the default password by going to the mtnl website and subsequently in
the router would be another good step.
3) Also, after every change, we are supposed to go into Tools-->System, Save and
Reboot. This does not work with Firefox 1.5 beta atleast.
Hope this helps.
I have already told my sub divisional engineer about this and sent a brief note
to the feedback form.
Does it warrant sending it to the papers?
regards
abhi
Ignorance is Strength.
What you don't know cannot hurt you.
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
>Hi all,
>I am a student of S K Somaiya College of Arts, Science and Commerce. We
are having our annual festival between 12th to 17th December >2005 combining
all
>the sections of the college which includes Department of Computer Science
and
>I. T.
> On this occasion, I would like to have a seminar on GNU/Linux for
encouraging the usage of GNU/Linux among my college students. I invite,
>anyone in the list whoever would like to conduct this seminar with
reference to the following points with some experience in the industry.
>1) What is Linux (Kernel, history, Linus Torvalds, Free Software is
exactly?)
>2) Why Linux? (Comparison with Windows, Security, Reliability, Features)
>3) The X-Window System and Desktop Environments (GNOME, KDE)
>4) Basic tips, Do's and Don't for installing and using Linux and Hardware
Compatibility Details
>5) Reducing Software Piracy and encouraging usage of Licensed Software
and/or using GNU/Linux and software available from internet >(website
links).........
>Awaiting a positive response.
>Roshan
I am a student of K J somaiya engg collge ,electronics. I can help you if
newbies are your target audience because i am no expert on linux!!
Last month we conducted a seminar on linux for newbies with similar
objectives ,in our college ,100 people turned up and we distributed OpenSuse
10 , all funded by the college!!Contact me off the list if you think i can
help you. I have exams till the 12th so i am available after that.
--
The Future is Open...The Future is LINUX
Hi people,
I want to make an mp3 player in Linux. It's just for the experience. I
was looking around for the specs of mp3 format. Couldn't find any. That
is kinda obvious since mp3 is a proprietary format. But there are so
many open source mp3 decoders AND encoders. Where / how do these people
get the specs? If they can get the specs then so should I. Can you
please suggest a link / a book or a something where I could get
developer specs for the mp3 format?
Thanks a lot :)
--
Dinesh A. Joshi
Hi,
I'm having problems with my SMTP server. I am not sure that my messages
are reaching the list. Please reply if you get this message.
Thanks,
Mrugesh
I am considering buying APC BR800-IN (880VA/550W) for my Linux WS. It
has an USB port for monitoring purpose.
Is anyone using this model successfully with Linux (apcupsd or nut)?
Any other brand/model (same capac. range) that is Linux friendly
(compatible with apcupsd/nut)?
TIA for your input.
--
Arun Khan
Linux is like a wigwam - no gates, no windows, apache inside
> Where / how do these people
> get the specs? If they can get the specs then so should I. Can you
> please suggest a link / a book or a something where I could get
> developer specs for the mp3 format?
I had once worked on a utility for automatically updating tags from
musicindia website.... I found this opensource java based project to
be a very good starting point.. it has classes for MP3 files IDE tags
etc.
http://mediachest.sourceforge.net/
you may also look at KDE multimedia sources if you are comfortable with C++
Dear LUG members,
The LinuxAsia 2006 Call for Speakers is now open. You
are invited to submit interesting and innovative talks
for LinuxAsia 2006's conference sessions and forums.
We seek high-quality submissions that promote the
knowledge of open source software with emphasis on OSS
technologies, trends, collaboration techniques, best
practices, business solutions and case studies.
Specific topics of interest include:
* Data and Application Migration
* Open Source Desktops
* High Performance Computing and Clustering
* Databases
* Content Management Systems
* Scalable Storage and File Systems
* Virtualization
* Wireless and Mobile Computing
* Security
* LAMP Technologies
* Open Source IDEs
* Web Applications and Services
* Open Source Best Practices and Collaboration Models
* Open Source Licensing and Business Models
* Localisation in Indian Languages
* Open Source Support and Deployment
* Open Standards
Submit your conference proposal at
http://www.linuxasia.net/speakers
-- LinuxAsia Program Committee
LinuxAsia Conference & Expo 2006
February 8-10, 2006 | New Delhi, India
http://www.linuxasia.net/
__________________________________________________________
Enjoy this Diwali with Y! India Click here http://in.promos.yahoo.com/fabmall/index.html
Hello All,
I am looking for a video cropper that works in FC4. Uncle google pointed
towards LIVES. After some dependency hassles I downloaded LIVES but
thats too slow and hangs and sometimes I need to press the reset button
as it hangs my system too. It may be due to the conflicts in rpms as
some dependencies were downloaded from yum and some from the forbidden
lavin(?). However I am now looking for something thats easy to load
directly from yum and works properly. I have converted some dvds to
single mpeg files (in windows) and I need to split them into 2 cds. I
was wonndering if any all purpose video editor is available for linux.
Any tips, with user experience?
Regards,
Rony.
___________________________________________________________
Yahoo! Model Search 2005 - Find the next catwalk superstars - http://uk.news.yahoo.com/hot/model-search/