Hi,
Has anybody use the Reliance WiMax (Broadnet) services? I am
more interested in their services in Mumbai. Good, Bad, Ugly?
Apparently they install separate antenna for each connection. The size
of this is as big as a laptop monitor or such, thats what the
marketing exec told me.
What I want to know is - 1) compatibility with Linux Boxes
2) does it work during the rainy season? Considering that rains in
Mumbai or Panvel is slightly on the extreme side ;), does it work fine
during the rainy season? I guess the same applies to the DTH setup
even.
Only reason, I am thinking its worth a try is because I won't
have to depend on availabilty of power and such because I will be
responsible to provide power to the setup which I can in case of load
shedding as well. Thanks in advance.
Cheers!
Pradeepto
--
The KDE Project : http://www.kde.org
KDE India : http://in.kde.org
Mailing List : http://mail.kde.org/mailman/listinfo/kde-india
hi friends.
In interview i was asked a question that. If a server is located at some remote place
and in a server one of the hard disk had failed. Then how do we find which hard disk
had failed from the several hard disk in the server remotely.
we need to hav certain command for this in linux.
in IBM AIX there is certain command but in linux i dont't know.
does any 1 know this than plz reply.
Explore your hobbies and interests. Go to http://in.promos.yahoo.com/groups/
hi
i want to use linux for my day to day work,
but can i use my HP Photosmart All in one printer C6188 in it,
all functions print scan copy fax, CD with this printer does not contains
Linux Drivers
also can i use FotoSlate of ACD Systems in Linux, or linux version of
Fotoslate,
something like that.
can u suggest which Desktop flavor and version will be right for me
P3 machine 512sd ram and 80 gb hdd
pls confirm
thanks n rgds
--
IPS Khurana
*****************************
Cell No: +91 9869019416
Khurana Sales & Services
Distributors & Wholesellers
Total IT Solutions!
Thane
http://ipskhurana.googlepages.com/
Member of BNI
Hi list,
Please enlighten me if you have any experience with using the Tata Indicom
USB Modem under the Plug 2 Surf scheme. I have recently taken their
subscription and facing problems using it with Kubuntu 7.10
It works fine in windoze, but fails to get any data transfer in Linux. I
tried
connecting using wvdial and also using KPPP.
The following is a copy of what i get at the terminal on running wvdialconf:
$ sudo wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- ERROR
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
////////
It appears that it successfully detected a USB modem and created
a wvdial.conf file accordingly.
But on trying to dial using "sudo wvdial", i get the following
on the terminal:
kamal@kMax:~$ sudo wvdial
WvDial<*1>: WvDial: Internet dialer version 1.56
WvModem<*1>: Cannot get information for serial port.
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATZ
WvDial Modem<*1>: ATZ
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<*1>: Sending: ATDT#777
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATDT#777
WvDial Modem<*1>: CONNECT
WvDial<*1>: Carrier detected. Waiting for prompt.
WvDial<Err>: Connected, but carrier signal lost! Retrying...
WvDial<*1>: Sending: ATDT#777
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATDT#777
WvDial Modem<*1>: CONNECT
WvDial<*1>: Carrier detected. Waiting for prompt.
... and so on and so forth.. it keeps repeating connection attempts
and gives the same error
"WvDial<Err>: Connected, but carrier signal lost! Retrying..."
I have used wvdial for MTNL Garuda's USB modem on the same installation
and it was working fine back then. Also, there was an existent wvdial.conf
file with those old settings for MTNL Garuda connection until i
executed "wvdialconf" again for the tata indicom USB modem.
[* wvdial gave the same problem even with Ubuntu 7.04 installed on the same
machine.]
While when i tried connecting with KPPP on Kubuntu 7.10, it did succeed in
connecting, that is, it showed me that its connected and the USB modem's
indicator
too indicated a connection. But i still could not surf the net (or ping
any websites)
Am i missing out something while configuring the connection. Could this
be an issue
with the DNS?
The same modem is working fine for windoze on the same machine.
Any help or your experiences in this regard are greatly appreciated. Thanks.
--
Regards
kamal
{ LINUXERS http://mm.glug-bom.org/mailman/listinfo/linuxers /}
http://www.copyleft.in
ftp.copyleft.in
username: sameep
password: vGJ8gN$S
Space : 200 GB
Sorry for the delay.
Regards,
Naveen Dhanuka
Hi ,
The files are uploaded to the ftp. You can download them at
ftp://ftp.copyleft.in/LUG/KEdu.iso
Thanks once again to Naveen for the space.
Regards,
Sameep
Hi,
I am Ansari Samir & I am looking for Qcodo.com
<http://www.qcodo.com/>Framework Expert as a consultant to my company.
Please let me know, if any one is interested.
Regards,
Ansari Samir.
0091 9820200390
http://www.samruz.com/
PHP Programmer required with minimum 6 months of experience on LAMP,
ie. Linux, Apache, MySQL & PHP.
Skills
1) writing secure and light codes
2) good R&D skills
Qualification : Any
Contact
Mr. Anand Sharma
+91-9970339028
--
With Regards
Abhishek Amberkar
Born To Be Free...
Born To Use GNU/Linux...
