I'm new to this Group and to Linux also.
As Gimp is a substitute for Photoshop, is there any substitute for Flash?
A N D Y's L A Bs
Hi, all i have some querries please see down
We are Planning to migrate from Windows to Linux Platform.Currently we are having two departments with below hardware and software configurations. We seek your guidance for this migration process. We will be very grateful if you can help us out in this pr
We seek your guidance on following queries :-
1. Can you please suggest us which flavour of linux is suitable for each department depending upon software used by them? We have tried Suse 9.0 and RedHat 9.0 & Federo Core 3.
2. Can you please suggest us qually efficient linux based compatible softwares for below given softwares ?
3. Also we are looking for Diskless Networking (dumb client and HDD shared on server) for above 2 departments. Can you please suggest us which networking configuraton (hardware and software) is best suited. Kindly note that Department 2 is using Desktop P
4. As we are very much new to Linux environment, the linux flavour which we will choose should also have good online support available where we can ask our questions and get the results quickly.
5. Also our users are very much familiar to windows environment, so the softwares on linux which we will choose should be user friendly and GUI based.
6. Also those softwares should be tried, tested and stable so as we would not face any problem in future.
15 Machines MS Excel
C.P.U. - 200 to 300 Mhz Tally
RAM 32 to 64 MB MS Access
HDD 10 to 40 GB Developed Programs in Visual Basic
Stand Alone Systems and No Server
10 Machines Pagemaker 5.0 and 6.5
C.P.U. - 200 Mhz. To 1.7Ghz Devnagri Fonts Software
RAM 32 to 256 MB Photoshop
HDD 10 to 40 GB
Stand Alone Systems and No Server
I have a Dell inspiron 510m laptop.
from lspci -v it shows.
000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: Conexant: Unknown device 5422
Flags: bus master, medium devsel, latency 0, IRQ 7
I/O ports at d400 [size=256]
I/O ports at d080 [size=128]
Capabilities:  Power Management version
I installed slmodem modules. it gets the modem through alsa , &
detected by wvdialconf , when below is run.
cartoon:~# slmodemd -c INDIA --alsa
SmartLink Soft Modem: version 2.9.10 Feb 8 2005 14:54:01
symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
modem `modem:1' created. TTY is `/dev/pts/2'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
But dialing doesnt work, there is no sound ( even after adjusting
alsamixer settings - Phone) & it doesnt dial?
What could be the problem. below is output of wvdial trying to dial
vsnl ( 172226 )
cartoon:~# wvdial vsnl
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATX3M1L3
--> Sending: ATQ0 L3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 L3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
--> Modem initialized.
--> Sending: ATDT172226
--> Waiting for carrier.
--> Unknown dial response string.
--> Disconnecting at Fri Feb 18 18:49:00 2005
i m a PG student ...This year i m thinking abt a device driver project in Linux probably printer driver.
I dont know much abt linux internal working and also want help abt Printer driver.
So plz suggest me any referance/book/web-site that u find helpful for me.
Thanks in Advance.
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
I got OpenLDAP configured on my qmail server but lately its giving me problem with "untimely death" and by chking the status gives me error slapd dead,but pid file exists,therefore i've to manually restart the ldap services i can't find the logs either, i chkd the slapd.conf file (it seems ok)
1>is there anyway i can prevent the failure of slapd
2>or shud i make a script for the ldap services and restarts it automatically on failure
3>and how do i generate the logs for the same
...pls help me
Thanks in advance,
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
Is there anyone who recommend me any biometric device for designing
fingerprint based attendance recording system? I want to go for hardware
only and software will be designed inhouse because all parties are selling
windows based software which can be operated from one machine. I want to
design it in PHP/MYSQL (i.e browser based) can be operated from anywhere. I
need only device and import/export data software. I had some demo but
dealers are quite confused to give it to Linux system. They recommend me to
export data through windows system which I don't need. Data import/export
should be automated by shell script. Any recommendation for device and
dealers will be highly appreciated.
Bilal Ahmed Mazhar
On Monday 28 February 2005 10:27, Soumen Dass wrote:
> sherlock(a)vsnl.com wrote:
> > On Sunday 27 February 2005 20:30, harshal(a)iucaa.ernet.in wrote:
> > LST250 FWT works at 230Kbps. Just set Baud = 230400 in
> > /etc/wvdial.conf.Ofcourse the over-the-air speed stays at 4.5kbps
> > or so.
> Do you mean that the actual/effective speed for reliance is around
> 4.5 kbps? In other words as good as my ol' MTNL dialup
144kbps (or is it 170kbps)) is the total channel throughput. Shared
by umpteen users. Result 4.5kbps actual throughput most of the time.
Occassionally you may get a burst of speed when the channel is
relatively less cluttered. Unless you are guaranteed in writing of
a fixed continuos bandwidth, all the promises are rubbish.
In fact a 9600bps gsm connection (not gprs) works far better than
any of the shared schemes. Of course you are charged Rs.4 per minute.