hello all , well i want to know if any one has configure the same ( moxa C502-ISA/35 dual Sync Board) on Rh6.2 kernel 2.2.14-5 when i install drivers of that which are downloaded from site(www.moxa.com.tw) they get install with out any errors but when i do #insmod mxc502 #insmod sysncppp #insmod mxc502m baseaddr=0xCC00 txclock=0 speed=64000 bps isairq=4

it gives me error in command 3

like --> /lib/modules/2.2.14-5.0/net/mxc502m.o : init_module Device or resource busy

and that time at dmesg this is the output of the command given -->mxc502m: Not any Moxa board is set.

-->Some of the required outputs # lsmod Module Size Used by syncppp 8776 0 (unused) mxc502 3040 0 lockd 31592 1 (autoclean) sunrpc 53540 1 (autoclean) [lockd] rtl8139 12388 1 (autoclean) # less /var/log/messages

Sep 12 16:05:43 router kernel: Generic Moxa C502 board interface driver v1.0

Sep 12 16:19:19 router kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994

Sep 12 16:19:19 router kernel: Linux port (c) 1998 Building Number Three Ltd & J an "Yenya" Kasprzak.

#dmesg

# less /proc/interrupts CPU0 0: 84008 XT-PIC timer 1: 1165 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 11: 945 XT-PIC eth0 13: 1 XT-PIC fpu 14: 534839 XT-PIC ide0 NMI: 0

and #less /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 6000-6007 : ide0 6008-600f : ide1 6200-627f : eth0

what could be that ? and how to short out this error ?

WEll if some one has done the same or some one has pointer for this thanks in adv Dhanraj sheth

===== The World is a samll Place to be in!!! So Keep (: & keep in touch http://linuxdhanraj.tripod.com/

________________________________________________________________________ Yahoo! India Matrimony: Find your partner online. Go to http://yahoo.shaadi.com